Skip to content

Topic

Comparison

  1. 8 min read

    Luxury Vinyl Plank vs. Waterproof Laminate: Which One Fits Your Home?

    Waterproof laminate is not universally better than luxury vinyl plank, and LVP is not automatically better in every room. Choose by the exact product’s water-claim scope, approved rooms, surface an

  2. 8 min read

    Siding Compared: Fiber Cement, Engineered Wood, Vinyl, Steel

    James Hardie, LP SmartSide, vinyl and steel compared on weight, climate lines, clearances, warranty rules and 2026 cost per square before you order an elevation.

  3. 8 min read

    Housewrap vs ZIP System vs Felt: Choosing a WRB

    Tyvek, ZIP System, felt, and fluid-applied weather-resistive barriers compared on perm rating, water holdout, tape compatibility, UV limits, and IRC R703.2 compliance.

  4. 9 min read

    Roof Sheathing Compared: OSB vs Plywood vs ZIP System

    OSB, CDX plywood, or Huber ZIP System for roof decking? Compare span ratings, edge swell, thickness by rafter spacing, fastener schedules, and 2026 sheet pricing.

  5. 8 min read

    Gutters Compared: K-Style vs Half-Round, Aluminum to Copper

    K-style vs half-round, 5-inch vs 6-inch sizing from roof area and rainfall, and how aluminum, steel, copper, zinc and vinyl actually compare before you order.

  6. 8 min read

    Drip Edge: Types, Sizing, and Code Requirements

    Type C, D and F drip edge profiles compared, plus IRC R905.2.8.5 sizing and fastening rules, eave vs rake install order, materials, and the gutter apron distinction.

  7. 8 min read

    TPO vs EPDM vs Modified Bitumen: Low-Slope Roofing Compared

    Below 2:12, shingles are not code-legal. Compare TPO, EPDM, and modified bitumen on seams, attachment, insulation, service life, and 2026 installed cost per square.

  8. 8 min read

    Decking Compared: Trex vs TimberTech vs Fiberon vs PT

    Capped composite, capped PVC, uncapped composite, and pressure-treated pine compared on span, heat, fasteners, warranty structure, and 2026 material cost ranges.

  9. 8 min read

    Roof Flashing Types and Where Each One Goes

    Step, apron, counter, valley, kickout, pipe boot, cricket and drip edge flashing explained: where each belongs, material gauges, galvanic pairing rules and IRC references.

  10. 8 min read

    Ice and Water Shield: Where It's Required and How Much

    How to calculate the IRC R905.1.2 ice barrier distance on a real roof pitch, where membrane belongs in any climate, and how granulated, smooth and high-temp compare.

  11. 8 min read

    Exterior Trim Compared: PVC vs Composite vs Wood

    Cellular PVC, poly-ash, engineered wood, fiber cement, finger-joint pine, and cedar compared by where each survives on the wall, plus fastening, gapping, and sealant rules.

  12. 9 min read

    Roofing Fasteners: Nails, Cap Nails, and Screws Specified Right

    Fastener errors are the most common cause of a denied roof warranty claim. Gauge, head size, length rules, 4 vs 6 nails, cap fasteners, metal screws, and galvanic pairing.