Skip to content

Journal

Buying guides, material comparisons and news from Super Arbor.

Page 6

  1. 8 min read

    How Much Flooring Should You Buy? Cartons, Waste, Pattern, and Repair Stock Explained

    To calculate flooring boxes, measure the net area that will actually receive flooring, add a project-specific allowance for cuts, defects, layout, and future repair stock, divide by the exact carto

  2. 6 min read

    Which Mortar and Grout Do You Need? A Tile-Project Selection Checklist

    Choose mortar from the tile, substrate, membrane, location, format, exposure, and applicable installation standard—not from tile color or one “works everywhere” label. Choose grout from joint width

  3. 8 min read

    Luxury Vinyl Plank vs. Waterproof Laminate: Which One Fits Your Home?

    Waterproof laminate is not universally better than luxury vinyl plank, and LVP is not automatically better in every room. Choose by the exact product’s water-claim scope, approved rooms, surface an

  4. 6 min read

    Tile Slip Resistance and DCOF: What the 0.42 Number Does—and Does Not—Tell You

    A wet DCOF value of 0.42 or greater is associated with the ANSI A326.3 classification for certain level interior spaces expected to be walked on when wet. It is not a universal safety threshold, AD

  5. 6 min read

    Buying Flooring Online: Samples, Lot Numbers, Freight Delivery, Damage Checks, and Returns

    Before buying flooring online, verify the exact manufacturer, collection, color, model, UPC/GTIN, dimensions, construction, carton coverage, installation documents, and room approval. Then confirm

  6. 7 min read

    Do You Need Underlayment Under Vinyl Plank Flooring? A Subfloor-by-Subfloor Guide

    Usually, you should not add a second cushioning underlayment beneath LVP that already has an attached pad unless the flooring manufacturer expressly approves it. You may still need a separate vapor

  7. 7 min read

    6-Mil vs. 12-Mil vs. 20-Mil Wear Layers: How to Read an LVP Specification

    For a low-traffic residential room, a 6-mil wear layer may be a reasonable candidate; 12 mil often suits busier homes; and 20 mil is commonly considered for heavy residential or eligible commercial

  8. 7 min read

    Flooring Transitions Explained: T-Molding, Reducers, End Caps, and Stair Noses

    Use T-molding between floors of roughly equal finished height, a reducer where one hard floor is higher than the next surface, an end cap where flooring stops at carpet or a vertical edge, and a st

  9. 8 min read

    Sourcing Roofing Materials After Storm Damage

    Document, mitigate, then repair: how ACV vs RCV, matching provisions, discontinued shingles, and post-storm supply shortages shape what you can actually buy and when.

  10. 8 min read

    Siding Compared: Fiber Cement, Engineered Wood, Vinyl, Steel

    James Hardie, LP SmartSide, vinyl and steel compared on weight, climate lines, clearances, warranty rules and 2026 cost per square before you order an elevation.

  11. 8 min read

    Housewrap vs ZIP System vs Felt: Choosing a WRB

    Tyvek, ZIP System, felt, and fluid-applied weather-resistive barriers compared on perm rating, water holdout, tape compatibility, UV limits, and IRC R703.2 compliance.

  12. 9 min read

    Roof Sheathing Compared: OSB vs Plywood vs ZIP System

    OSB, CDX plywood, or Huber ZIP System for roof decking? Compare span ratings, edge swell, thickness by rafter spacing, fastener schedules, and 2026 sheet pricing.